Setting up an ip address – Kodak ESP OFFICE 2100 User Manual
Page 16
Networking Your Printer
10
www.kodak.com/go/aiosupport
Setting up an IP Address
IMPORTANT:
You should only need to set up an IP Address for your printer if you are
having a problem connecting your printer to a wireless network. Typically, it
is not necessary to set up an IP Address. This procedure is for advanced
users.
All IP Address entries have the following format: 000.000.000.000. If an address or
Subnet Mask has only one or two characters between the periods, include one or
two leading zeros in front of that number. For example:
To set up your IP Address on the printer:
1. Press
Home.
2. Press
to
select
Network Settings, then press OK.
3. Press
to
select
Advanced IP Address Setup, then press OK.
4. Press
OK again to continue.
5. Select one of the following, then press
OK:
•
Dynamic (DHCP)
•
Manual (Static)
6. If you selected
Manual (Static), you are prompted to enter an IP Address, a
Subnet Mask, a Gateway Address, and a DNS Server address. Press
OK after
each entry. Use the navigation buttons to enter each digit of the numbers.
Consult your Internet Service Provider or network administrator for more
information.
The address as it may appear
in your documentation
How to enter the address
in the printer menu
149.89.138.149 149.089.138.149
149.2.40.149
149.002.040.149