KTI Networks KS-2601 - Manual (Page 35)

31
Port Name Status Disable Auto. Speed Duplex Flow Control
==============================================================
1 10/100M base-T DOWN NO ON 10 Half OFF
2 10/100M base-T DOWN NO ON 10 Half OFF
3 10/100M base-T DOWN NO ON 10 Half OFF
4 10/100M base-T UP NO ON 100 Full OFF
5 10/100M base-T DOWN NO ON 10 Half OFF
6 10/100M base-T DOWN NO ON 10 Half OFF
7 10/100M base-T DOWN NO ON 10 Half OFF
8 10/100M base-T UP NO ON 100 Full OFF
9 10/100M base-T DOWN NO ON 10 Half OFF
10 10/100M base-T DOWN NO ON 10 Half OFF
11 10/100M base-T DOWN NO ON 10 Half OFF
12 10/100M base-T DOWN NO ON 10 Half OFF
13 10/100M base-T DOWN NO ON 10 Half OFF
14 10/100M base-T DOWN NO ON 10 Half OFF
15 10/100M base-T DOWN NO ON 10 Half OFF
Press any key to continue ...
==============================================================
3.17 show protect command will show current protected port setting.
(Protected ports cannot communicate with each other.)
For example,
>show protect
[Protected Port Setting]
Protected Function: Disabled
===================================
Port No. Protected
===================================
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
9 Disabled
10 Disabled
11 Disabled
12 Disabled
13 Disabled
14 Disabled
15 Disabled
Press any key to continue ...
===================================
3.18 show pvlan command will show current port-based VLAN setting of the
switch.
For example,
>show pvlan
[Port-based VLAN Configuration]
Port-based VLAN : Enabled
========================================================