Kyocera Kyo Manage 5755km - Manual (Page 2)

KYO
SOLUTIONS
Features & Benefits
AFP/IPDS & SCS PRINTING
IBM host print jobs can be printed on a Kyocera printer or MFP
in an Ethernet environment.
HIGH SPEED PRINTING, 100+ PPM
Data conversion is accomplished at the 5735km/5755km and
sent to the Kyocera printer or MFP via the Ethernet LAN. The
5735km/5755km supports high-speed printing featured in Kyocera
printers and MFP’s.
I-O CUSTOMIZED FINISHING COMANDS
Kyocera finishing features such as duplexing, collating, stapling,
folding, hole-punching, etc. can be utilized in a host environment.
FULL IBM HOST CONTROL OF PRINT JOBS
The 5735km/5755km provides bi-directional communication between
the host and the printer, via port 9100 and PJL commands.
REMOTE PRINTING
The Kyocera printer or MFP can be attached locally or remotely
via a WAN or VPN network – The Kyocera printer does not need
to be next to the 5735km/5755km.
I-O’S AWARD WINNING PRINTER EMULATIONS
All AFP/IPDS and SCS functions such as duplex, page offset, COR,
fonts, and barcode, are fully supported by the 5735km/5755km.
Technical Specifications
FOR AS/400, ISERIES, ESERVER I5
Protocols: TCP/IP (PPR/PPD, TN5250e, LPR/LPD),
SNA, (APPC), AnyNet (SNA over TCP/IP)
IPDS Emulations: IBM 4028 AS1, 3812-2, 3816-1D/S, includes
4312/17 font support
SCS Emulations: IBM 3812-1, 4214, 5224, 5225, 5256
IPDS Towers: Supports all towers
System Requirements: OS/400 Release 3.1 or higher
FOR S/390 – ZSERIES
Protocols: TCP/IP (PPR/PPD, TN5250e, LPR/LPD),
SNA, (APPC), AnyNet (SNA over TCP/IP)
IPDS Emulations: IBM 4028 AS1, 3812-2, 3816-1D/S, includes
4312/17 font support
SCS Emulations: IBM 3812-1, 4214, 5224, 5225, 5256
IPDS Towers: Supports all towers
System Requirements: OS/400 Release 3.1 or higher
FOR LAN SYSTEMS
Protocols: TCP/IP (LPR/LPD), IPX/SPX, NetBIOS,
I-O DirectPortTM (Windows 9x Peer-to-Peer)
Supported LAN Hosts: Novell, Windows,Unix
FOR PRINTERS
Ethernet Connection: Port 9100, PCL 3/5e,
Auto-sensing 10/100 BaseT
Parallel Connection: Dot-matrix (SCS only), Laser (IPDS/SCS)
GENERAL
5735km Supports 1 Printer
5755km Supports Up To 3 Printers
Printer Ports:
One IEEE 1284 bi-directional Centronics
parallel port
Power Supply: 100-240V auto-switching (IEC)
Configuration: I-O Configuration Utility requires a
Windows 95 or higher PC
Specifications and design are subject
to change without notice.
Kyocera Mita America, Inc.
225 Sand Road, PO Box 40008
Fairfield, NJ 07004-0008, USA
©2005 Kyocera Mita America, Inc.
www.kyoceramita.com
For Product Sales:
190 North 220 West Suite 100
Salt Lake City, Utah 8116
801.973.6767
www.iocorp.com
For Product Support: