Overheating safety device, Care and maintenance – Kambrook KFH330 User Manual

Page 5

Advertising
background image

For KFH330:The temperature knob acts
as an automatic thermostat:

• Turn both selector and temperature

knobs to high

• Once a comfortable room temperature

has been reached, slowly turn
temperature knob anti-clockwise until
you hear a click.

• At this setting your heater will

automatically cycle high and low to
maintain the desired room temperature

Important – The front metal grill will
become very hot during normal
operation. Ensure that extreme care is
taken when moving the unit and allow
ample time for the front grill to cool
down.

Overheating Safety device

Your heater is fitted with a safety device
that switches off the heater in the event
of overheating. Should the heater stop
working, turn the heater off and inspect
for blockage of air inlet or outlet.Wait at
least 5 minutes for the protection system
to reset before attempting to restart the
heater.

If the heater fails to operate or the safety
device switches the heater off again,
return the heater to your nearest service
centre for examination or repair.

CARE AND MAINTENANCE

• Always turn off and then unplug the

heater before cleaning.

• Use only a clean, dry cloth to clean the

external surfaces of the heater only.

• If the heater has collected dust or dirt

inside the unit or around the element,
have the unit cleaned by a qualified
service agent. Do not operate the heater
in this condition.

• Do not attempt to open the case of the

heater at anytime, there are no
customer serviceable parts inside.

• When not in use, pack the heater,

preferably in its original box for best
protection, and store in a cool, clean and
dry location.

• Under normal operation in a dark

environment it may be possible to see
the heating element turn dull red during
operation. This is a normal operation.

5

Advertising
This manual is related to the following products: