Kyocera OYSTR KX9 - Manual (Page 8)

1 Getting Started
1 G
ETTING
S
TARTED
Finding your phone’s serial
number
To activate your Virgin Mobile account, you
need your phone’s serial number. To locate
the number:
1. Make sure your phone is turned off.
2. Hold the phone face
down.
3. Toward the bottom of the
phone there is a recess to
aid you in opening the
battery door. Use your
fingernail to pull the battery door away.
4. If necessary, remove the battery by pulling
back on the top edge of the battery.
5. Your phone’s serial number (the ESN) is
located just below the first barcode inside the
phone, next to the letter “D.” It is an 11-digit
number.
6. Write down the ESN.
7. Replace the battery (see “Installing the
battery” on this page).
Installing the battery
Your Kyocera OYSTR phone comes with a
removable lithium ion (LiIon) battery.
Fully
charge the battery before using the phone.
To install the battery:
1. Hold the phone face
down.
2. Toward the bottom of the
phone there is a recess to
aid you in opening the
battery door. Use your
fingernail to pull the
battery door away.
3. Place the battery in the
phone casing with the
metal contacts toward the
bottom of the phone.
4. Place the battery door
tabs in the openings near
the top of the phone.
5. Press the battery door
until it clicks into place.
Note: Before you remove the battery, make sure
the phone is powered off.
ACE-Kx9D-VMU-EN.book Page 1 Monday, July 2, 2007 2:27 PM