Kodak DCS 410 - Manual (Page 53)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Preparing the Camera and the Computer G 4-9
3. Turn on the camera as shown below.
MODE
ISO
DRIVE
OFF
Ps
Shutter release button
Power switch set to ON
4. Wake the camera by lightly pressing the shutter release button.
NOTES: The camera turns off after several seconds of inactivity; therefore, as
you complete these steps you may need to reawaken the camera by lightly
pressing the shutter release button again.