Kawasaki 840194 User Manual

Page 7

Advertising
background image

OPERATING THE IMPACT WRENCH

Be aware that this tool is always in an operating condition

because it does not have to be plugged into an electrical outlet. Always turn the
switch “OFF” and remove the battery pack before changing bits.

VARIABLE SPEED TRIGGER SWITCH

Never tape the trigger switch down to provide continuous

high speed. The tool may fail under such conditions causing fire or
personal injury.

THIS TOOL IS CONTROLLED
BY A TRIGGER SWITCH:
• The speed of the Cordless Impact

Wrench depends on the amount of pres-
sure you put on the trigger.

• The more pressure you apply, the faster

the Cordless Impact Wrench will go.

• Release the pressure and the Cordless

Impact Wrench will slow down.

FORWARD / REVERSE AND TRIGGER LOCK LEVER

Be sure the trigger is released when changing the position of the lever.
Always store the tool in the “LOCKED/OFF” position.

Always check the direction of the Cordless Impact Wrench's rotation before
use.

12

IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES
When using your Cordless Impact Wrench continuously, the batteries in your bat-
tery pack will become hot. You should let a hot battery pack cool down for approxi-
mately 30 minutes before attempting to recharge. When the battery pack becomes
discharged and is hot, the red light on the charger will flash. When the battery
pack cools down, the red light will glow continuously to indicate fast charging
mode, 1-hour charge time.

This will occur when continuous use of your Cordless

Impact Wrench causes the battery pack to become hot. It does not occur
under normal circumstances.

FUNCTIONAL DESCRIPTION

CONTROLS AND COMPONENTS:

1. Variable Speed Trigger Switch
2. Forward/Reverse and

Trigger Lock Lever

3. Gear Enclosure
4. Release Buttons on Each Side
5. Charger

COMPONENT

MODEL NUMBER

CHARGER

691173

BATTERY PACK

691174

8

5

1

2

9

3

7

10

11

4

6

6. LED Charging Indicators
7. Anvil
8. Comfort Rubber Grip
9. Battery Pack

ACCESSORIES:

10. 1/2" Drive Impact Socket (4)
11. 5" x 1/2" Drive Extension Bar

TRIGGER

SWITCH

Advertising