Kambrook KSK210 - Manual (Page 11)

10
Removing Mineral Deposits
Mineral deposits in tap water may
cause the kettle interior and water
window to discolour over time.
This may be removed by using a
proprietary kettle descaler which
is available from most leading
supermarkets, department stores
and hardware stores.
Alternatively
1. Fill the kettle until
2 ⁄
3
full with 1 part
vinegar (or a few slices of lemon)
and 2 parts water, bring to the boil
and allow to stand overnight.
2. Empty the solution from the kettle.
Fill the kettle with clean water,
bring to boil and discard the
water. Repeat and the kettle will
be ready for use.
Storage
Ensure the kettle is switched off,
cleaned and dried before storing.
Ensure that the lid is closed and
locked firmly into place. Wrap the
power cord around the cord storage
under the power base. Stand the
kettle upright on the power base.
Do not store anything on top.
Care, Cleaning and Storage
continued