Kodak C800 - Manual (Page 13)

8
3. Press the SELECT BUTTON (40) to
activate the “blinking digits” of the
selected date or time format.
4. Move the ZOOM - DIAL LEVER (1) to the
right or left to increase or decrease
the number or press the select button
again to increase the number.
5. Press the ENTER BUTTON (39) to store
the information and to activate the
next “blinking digits” (follow steps 4
through 5 to complete your selection
or press the enter button again to end
the session).
• After you set the date or time, the
LCD
panel displays “DATE IS” or
“TIME IS” followed by the selected
date or time.
ATTACHING THE STRAP
1. Insert the
shorter looped
end of the
strap behind the
STRAP POST
(10).
2. Thread the
longer end of
the strap
through the
shorter loop.
3. Pull the
strap tight.
Control-button activator
Use the knob on the clasp of the camera
strap to activate the smaller-sized
control buttons on the camera.