Kenwood TK-2140 - Manual (Page 25)

20
CONVENTIONAL OPERATION (Trunking Format)
T
RANSMITTING
1 Select the desired system and group using the
encoder and the System or Group keys.
2 Press the key programmed as Monitor to check
whether or not the channel is free.
• If the channel is busy, wait until it becomes free.
3 Press the PTT switch and speak into the
microphone. Release the PTT switch to receive.
• For best sound quality at the receiving station, hold the
microphone approximately 1.5 inches (3 ~ 4 cm) from
your mouth.
R
ECEIVING
1 Select the desired system and group using the
encoder and the System or Group keys. (If the
Scan function has been programmed, you can switch
it ON or OFF as desired.)
2 When you hear the dispatcher’s voice, readjust the
volume as necessary.