Konica Minolta DiMAGE F200 - Manual (Page 92)

92 P
LAYBACK MODE
-
ADVANCED OPERATION
The DPOF-set menu option is used to create an order for standard prints from still images on the
memory card. Single, multiple, or all images can be printed. Print orders are created in the custom 2
section of the playback-mode menu (p. 84). The print menu option has four settings:
About DPOF
This camera is supported by DPOF™ version 1.1. The DPOF (Digital Print Order Format) allows
direct printing of still images from digital cameras. After the DPOF file is created, the memory card is
simply taken to a photofinishing service or inserted into the memory-card slot of DPOF compatible
printers. When a DPOF file is created, a misc. folder is automatically created on the memory card to
store it (p. 114).
Creating a DPOF Print Order
To create a DPOF file for the displayed or highlighted image.
This
frame
All
frames
Marked
frames
To chose a group of images to be printed or when the number of copies of
each image varies. When selected, the frame selection screen will appear. Use
the left/right keys of the controller to highlight an image to be printed. Pressing
the up key will mark the image with the printer icon. The number next to the
icon indicates the number of copies that will be printed. Pressing the up key will
increase the number of copies, pressing the down key will decrease the num-
ber. A maximum of nine copies can be ordered. To deselect an image for print-
ing, press the down key until the number of copies reaches zero and the printer
icon disappears. Continue until all the images to be printed are marked. Press
the central button of the controller to create the DPOF file, or press the menu
button to cancel the operation and return to the playback menu.
To create a DPOF file for all images on the memory card.
Cancel
all
To delete the DPOF file.