Kompernass KH 2220 - Manual (Page 4)

- 2 -
• Do not allow individuals (including children) to
use the appliance whose physical, sensorial or
mental abilities or lack of experience and know-
ledge hinder their safe usage of it if they have
not previously been supervised or instructed in
its correct usage.
• Tell children about the appliance and its potenti-
al dangers so that they do not play with it.
• Do not use an external timing switch or a
separate remote control system to operate the
appliance.
You can thus prevent the appliance
from being damaged
• Use the kettle
ᕧ only in the base station ᕦ pro-
vided for the same. Do not use the base station
ᕦ for any other purposes.
• Do not expose the base station ᕦ to any liquids
and protect it from splashes.
• Do not separate the kettle ᕧ from the base sta-
tion ᕦ while the appliance is in operation.
Always switch off the appliance first.
• An improper use or handling of the appliance
may lead the appliance to malfunction and
cause injuries to the user.
• No liabilities shall be accepted for damages
caused by improper or wrong use.
Before the First Use
1. Remove all the packaging material!
2. Clean the kettle
ᕧ, by pouring water into it and
bringing it to a boil (See "Operation“). Pour out
the water and repeat the process.
Operation
1. Pull the power cord out only as much as is
necessary. Pull it out by opening the base station
ᕦ and connect the plugs with an appropriate
power socket.
2. Open the lid and fill in with the desired quan-
tity of water. Please note the level indicator ᕥ of
the appliance.
Fill the kettle ᕧ...
- at least up to the MIN mark, so as not to over-
heat the electric water kettle.
– no higher than the MAX mark so that no boi-
ling water spills out.
3. Close the lid and place the appliance on the
base station
ᕦ. The appliance can only be swit-
ched on if it is fixed to the base station.
4. Keep the On/Off switch ᕤ on „ “- position.
The appliance begins to operate, the indicator
lamp
ᕣ begins to flash.
5. If the water is boiling the appliance switches off
automatically. The On/Off switch ᕤ automati-
cally moves to the "O“ position, the indicator
lamp
ᕣ turns off.
6. If you want to stop or interrupt the boiling pro-
cess, keep the On/Off switch ᕤ on the "O“
position.
However, you can continue the boiling process
by waiting for 20 seconds until the heating ele-
ment has cooled off. You can then switch on the
appliance once again.
During the cooling phase, do not press the
on/off switch
ᕤ, as this can damage the appli-
ance.
7. While the appliance is not in use, unplug the
power cord from the socket, so as to prevent the
appliance from an inadvertent start.
Note: The appliance has a safety device. This swit-
ches off the heating element, if the appliance is
switched on when empty or is cooking dry. In such
a condition, allow the appliance to cool off com-
pletely, before pouring in water again.
For safety reasons and to avoid injuries do not
open the lid when the water is boiling or very hot.
IB_KH2220_37672_LB6 01.09.2009 9:04 Uhr Seite 2