Konica Minolta KD-510Z - Manual (Page 102)

102
Setting the Operation Sounds
- You can turn on and off the beeps (sounds made for each type of operation
and warnings), the shutter sound, or the sound effects.
- The default setting is turned “ON” (set to sound).
Using the Set-up Menu
(Cont’d)
1. Select “SOUND”, press
̈ and the settings
screen appears. “BEEP” is selected, so
press
̈.
2. Using
̄ or ̆, select “OFF” or “ON” and
press either
̈ or the MENU/SET button. You
will return to screen 1.
• If you press
̇, the setting is invalidated and you
return to screen 1.
3. Returning to screen 1, select “EFFECT”.
Then the shown left (screen 3) appears. After
pressing
̈, use ̄ or ̆ to select “OFF” or
“ON”. Then press either
̈ or the MENU/SET
button and you will return to screen 1.
• If you press
̇, the setting is invalidated and you
return to screen 1.
4. Select “SHUTTER” on screen 1 and then
press
̈. Use ̄ or ̆ to select “ON” or “OFF”,
and then press
̈ or the MENU/SET button.
The settings are complete and you return
to screen 1.
• If you press
̇, the setting will be invalidated
and you will return to screen 1.
1
2
3
4