Start-up, Menus – Kodak EasyShare 5500 User Manual
Page 19
Getting started
You can purchase a duplexer and other accessories fo
1
Remove the door on the back of the printer by pressing in on the two latches and pulling out.
2
Insert the bottom of the duplexer into the printer and press the top in until it clicks.
You can control how long the printer waits before a sheet is flipped by the duplexer with the AiO Home
Centre (See General settings).
Start-up
When you power on your Kodak EasyShare All-in-One, status information is displayed on the LCD. After
the start-up is complete, the AiO printer enters Copy mode unless a photo device is attached. If a photo
device is attached or memory card inserted, the AiO printer enters Photo mode.
Menus
The Kodak AiO printer menus are accessed by the Menu, Photo, Copy, Scan and Fax buttons.
User’s Guide
15