Lenovo LT1952P - Manual (Page 24)

•˜Œ” ǻ™’¡Ž• ›ŽšžŽ—Œ¢Ǽ Š“žœœ ‘Ž —ž–‹Ž› ˜ ™’¡Ž•œ œŒŠ——Ž ‹¢ ˜—Ž
‘˜›’£˜—Š• œ ŽŽ™ǯ
f thŽ ›ŽšžŽ—Œ¢ ’œ —˜ Œ˜››ŽŒǰ ‘Ž œŒ›ŽŽ— œ‘˜ œ ŸŽ›’ŒŠ•
œ›’™Žœ Š— ‘Ž ™’Œž›Ž ˜Žœ —˜ ‘ŠŸŽ ‘Ž Œ˜››ŽŒ ’‘ǯ
‘ŠœŽ Š“žœœ ‘Ž ™‘ŠœŽ ˜
f t‘Ž ™’¡Ž• Œ•˜Œ” œ’—Š•ǯ ’‘ Š ›˜— ™‘ŠœŽ
Š“žœ–Ž—ǰ ‘Ž ™’Œž›Ž ‘Šœ ‘˜›’£˜—Š• ’œž›‹Š—ŒŽœ ’— •’‘ ™’Œž›Žǯ
 ‘Ž— ‘Ž ’–ŠŽ —˜ •˜—Ž› •˜˜”œ ’œ˜›Žǰ œŠŸŽ ‘Ž •˜Œ” Š— ‘ŠœŽ
Š“žœ–Ž—œǯ
 ›Žœœ ˜ •ŽŠŸŽ ‘Ž  –Ž—žǯ
ǯ
ǯ
Manually installing the monitor driver
8
3-4 LT1952p Wide Flat Panel Monitor User’s Guide
Below are steps for manually installing the monitor driver in
Windows Vista, Microsoft. Windows XP. and
Microsoft Windows 7
Installing the monitor driver in Windows 7
To install the device driver in Microsoft® Windows 7, do the following:
Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature
in Windows 7.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo
recommends using either 1440 x 900 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the
Windows 7 operating system.
4. Open the
Display Properties window by clicking Start, Control Panel and then click the
Hardware and Sound icon.
5. Click the
Display icon.
6.Click the
Adjust Resolution button.
7.Click the
Advanced Settings button.
8.Click the
Monitor tab.
9.Click the
Properties button.
10.Click the
Driver tab.
11.Open the
"Update Driver Software-Generic PnP Monitor" window by clicking on Update
Driver and then click the "Browse my computer for driver software" button.
12.Select
“Let me pick from a list of device drivers on my computer”.
13.Insert the Lenovo Monitor CD into the CD drive and click the
Have Disk button.
14.Click on the
Browse button and navigate to the following directory:
X:\Monitor Drivers\ (where X is the drive letter designator for the CD-ROM drive).
Select the file and click the Open button. Click the OK button.
15.Select
Lenovo LT1952pwD and click Next. The files will be copied from the CD to
your hard disk drive.
16.Close all open windows and remove the CD.
17.Restart the computer.
LT1952pwD.inf