LG 210 - Manual (Page 71)

6.3 Mode(1X/QNC)
This is setting enables you to set the speed for WAP,
BREW and Tethered Mode.
1. Press , , , .
2. Select Auto / 1X / QNC then press .
6.4 PAP ID
It is the user’s ID for PPP Authentication Protocol.
1. Press , , , .
6.5 PAP Password
It is the user’s password for PPP Authentication Protocol.
1. Press , , , .
7. Voice Services
Provides access to the voice services available with
your phone.
7.1 Voice Dial Prompt
Allows you to set how you activate voice recognition.
1. Press , , , .
2. Use to select a setting, then press .
Key press Activates voice recognition when you
flip open the phone and press the
voice command key.
Flip open Activates voice recognition whenever
you flip open the phone. (When the
phone is already open, you activate
voice recognition by pressing the
voice command key.)
Disable When Disable is selected, voice
recognition is disabled.
69
SETTINGS
Note
When using the 1X HSPD data service via an RS-
232C data cable, the port speed is set to
115,200 (230,400 is not supported). When
using the 1X HSPD data service via a USB data
cable, you may get better port speed if the port
speed is set to 230,400 rather than 115,200.
LG210_Eng.qxd 12/15/06 6:38 PM Page 69