LG LFD790 - Manual (Page 27)

27
Reference
Reference
Additional Information
Presetting the Radio Stations
You can preset 50 stations for FM and AM (MW).
Before tuning, make sure that you have turned down
the volume.
1. Press TUNER on the remote control. (If you are in
any menu mode, remove it completely by pressing
RETURN or HOME repeatedly.)
or
On the home menu screen, select RADIO and
then press ENTER.
2. And then every time you press TUNER, FM and
AM (MW) changes alternately.
3. Press and hold TUN.- or TUN.+ on the remote
control for about three seconds until the frequency
indication starts to change, then release.
Scanning stops when the unit tunes in a station.
4. Press PROG./CLEAR on the remote control.
A preset number will flash in the display window.
5. Press PRESET + or PRESET - on the remote
control to select the preset number you want.
6. Press PROG./CLEAR on the remote control.
The station is stored.
7. Repeat steps 3 to 6 to store other stations.
To tune in a station with a weak signal
Press TUN.- or TUN.+ repeatedly in step 3 to tune in
the station manually.
To clear all the stored stations
Press and hold PROG./CLEAR for about five seconds
and “ERASE ALL” is appeared in the display window
and then press PROG./CLEAR again, the stations are
cleared.
If you have accidentally entered into the “ERASE
ALL” mode and you do not wish to clear the
memory, do not press any key. After a few seconds
“ERASE ALL” will go off by itself and change to
normal mode.
Note:
If all stations have already been entered, the FULL
message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow the steps 5-6 as
above.
Listening to the Radio
Preset radio stations in the unit’s memory first (see
“Presetting the radio stations” on the left).
1. Press TUNER until AM (MW) or FM appears in the
display window.
The last received station is tuned in.
2. Press PRESET + or PRESET - repeatedly on the
remote control to select the preset station you
want.
Each time you press this button, the unit tunes in one
preset station at a time.
3. Adjust the volume by pressing VOL + or VOL- on
the remote control repeatedly.
To turn off the radio
Press POWER to turn the unit off or select another
function mode (MOBILE, DISC, USB).
To listen to non-preset radio stations
Use manual or automatic tuning.
For manual tuning, press TUN.- or TUN.+ on the
remote control repeatedly.
For automatic tuning, press and hold TUN.- or
TUN.+ on the remote control for about three
seconds on the remote control.
To select a preset radio station directly
You can use the number buttons on the remote
control to select a preset radio station directly.
For example, to listen to the preset station 4, press 4
on the remote control. To listen to the preset station
19, press 1 and then 9 (within 3 seconds).
For your reference
If an FM program is noisy
Press AUDIO repeatedly on the remote control so
that “STEREO”
disappears in the display
window. There will be no stereo effect, but the
reception will improve. Press this button repeatedly
again to
select “STEREO”.
To improve reception
Reorient the supplied antennas.