Lanier LD075 - Manual (Page 130)

Specifications
122
6
❖ ❖ ❖ ❖ Centering
Although the original is set at a different orientation to the paper, the machine
will not rotate the image by 90
° (Rotate copy).
❖ ❖ ❖ ❖ Erase
The width of the erased margin varies depending on the reproduction ratio.
If the size of the original is different to sizes listed in the following chart, the
erased margin might be shifted.
• Metric version
• Inch version
You can erase two parts using “Erase Inside 1” together with “Erase Inside
2”
❖ ❖ ❖ ❖ Margin Adjustment
If you set a binding margin too wide, part of the image may not be copied.
When making copies in Combine mode, the binding margin is added to cop-
ies after the combination is finished.
❖ ❖ ❖ ❖ Background Numbering
If the numbers overlap the copied image, the parts overlapped may look like
some pattern.
❖ ❖ ❖ ❖ Preset Stamp
You can change the size and density of the stamp with User Tools.
Depending on paper size, if you change the stamp size, parts of the stamp
might not be printed.
When you use this function with the Magazine or Booklet function, you can
print the stamp only on the first page.
Where Original Is Set Paper Size and Orientation
Exposure glass A3 L, B4L, A4KL, B5KL, A5L, 8 1 /
2
" × 14"L,
8 1 /
2
" × 13"L
Document feeder A3 L, B4L, A4KL, B5KL, A5KL, 8 1 /
2
" × 13"L
Where Original Is Set Paper Size and Orientation
Exposure glass 11" × 17"L, 8 1 /
2
" × 14"L, 8 1 /
2
" × 11"KL, 10" ×
14" L, 8" × 10"L
Document feeder 11" × 17"L, 8 1 /
2
" × 14"L, 8 1 /
2
" × 11"KL, 10" ×
14" L, 5 1 /
2
" × 8 1 /
2
" L
MartiniC1_GBcopy4_FM.book Page 122 Tuesday, April 23, 2002 6:23 PM