Lenoxx Electronics PH-3235 - Manual (Page 10)

IB-PH3235(MS)-WM-E-122203
Storing phone number into memory
9
MEMORY DIALING
You can quickly dial the numbers you stored into the 3 one-touch speed dial buttons or 10
two-touch speed dial memories.
For 3 one-touch dialing:
•
For 10 two-touch dialing:
1. Press the SPEAKERPHONE (HEADSET) button (the indicator will light), or pick
up the handset.
2. Press the STORE button.
In case you want to change a number you stored, simply store a new number, the old one
will be automatically erased.
NOTE 1. If you move your phone to another room or disconnect the phone line,
your stored numbers will remain in the memory for a short time, so
quickly reconnect it to the new jack or you will have to reprogram the
memory numbers.
NOTE 2. When storing emergency numbers (like 911) if the operator comes on, tell her
you are programming or testing a phone and you do not have an emergency.
Otherwise, they might dispatch the police to your location.
TO LIST YOUR MEMORY NUMBERS
1. Remove clear plastic cover MEMORY INDEX CARD.
2. Write numbers on MEMORY INDEX CARD (in pencil so you can change them later).
3. Replace MEMORY INDEX CARD and plastic cover.
If you want to store a calling card number into one of your memories, you may do this the
same way you program a phone number into memory. Also if you need a pause in the
number, simply press the REDIAL/PAUSE button on your phone.
4. Press one of the 3 one-touch
speed dial buttons (M1 to M3).
5. Repeat above steps 2 to 4 to store numbers into other memory locations.
3. Dial the phone number you want to store. You can store up to 15 digits.
TO DIAL NUMBER FROM 3 ONE-TOUCH NUMBERS
Get dial tone (by picking up HANDSET or pressing the SPEAKERPHONE (HEADSET)
button), and press one of the 3 emergency buttons marked with the symbols M1, M2 or M3.
TO DIAL A NUMBER FROM MEMORY BUTTONS (10 NUMBER LOCATIONS)
1. Press SPEAKERPHONE (HEADSET) or pick up HANDSET (listen for dial tone.)
2. Press AUTO and the numerical button in which the number you want to dial is
stored. The set will dial the number stored in the memory you selected
automatically.
EXAMPLE: Pressing AUTO 2 (in TONE or PULSE) will dial the number you stored in 2.
•
Press the AUTO button, and then press one of
the dialing keys (0 to 9) to store a phone
number in.
6. Press the SPEAKERPHONE (HEADSET) button, or hang up the handset.
IB-PH3235(MS)-WM-E-122203 .p65 12/27/02, 12:43 PM 10