Lightolier Alter Elegance QVE2GPFOS2FT - Manual (Page 2)

ORDERING INFORMATION
Explanation of Catalogue Number Example: QVE2GPFOS2FT120SB
SPECIFICATIONS
MATERIALS: One piece chassis constructed from die formed 20 gauge
cold rolled steel. Reflectors - 95% reflectance baked white acrylic matte
paint finish. Specular aluminum interior reflector. Soft white acrylic film on
inside of lamp shield conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic
matte paint finish.
ELECTRICAL: Rapid start HPF, thermally protected class “P” ballast (Bi-tube
type). If K.Os are within 3” of ballast use wire suitable for at least 90C.
LABELS: Listed by CSA, UL
QVE2GPFOS2FT
QVE
ALTER
ELEGANCE
2
FIXTURE
WIDTH
G
CEILING
TYPE
PF
LAMP
SHIELD
LAMP
QUANTITY
LAMP/FIXTURE
LENGTH
120
VOLTAGE
120,277
347
SB
OPTIONS
Standard exposed
T-grid ceilings
(NOMINAL 24”)
FT = TT5
Bi-tube
R =Radio Interface Filter
O =Emergency Lighting
System (for Canada)
N =Emergency Lighting
System (for U.S.)
Recessed direct
indirect soft light
optical system
PF =Micro-
perforated
SD =Solid
BALLAST TYPE
BE =50W Electronic TT5 RS
SR =40W Electronic TT5 RS
BX =40W Magnetic TT5 RS
PB =40W TT5 PowerSpec Dimming*
PC =50/55W TT5 PowerSpec Dimming*
SB =40W Genetic Electronic TT5
*Not available in 347V.
CLEAR POLISHED
ACRYLIC DROP
DOWN VISUAL ELEMENT
OS =Open slot (no acrylic)
OP =One Piece (no center slot)
GC =Clear acrylic
GG =Clear acrylic / Green projected color face
GB =Clear acrylic / Blue projected color face
GR = Clear acrylic / Red projected color face
We reserve the right to change, materials and finish in any way that will not alter installed appearance or reduce function and performance.
ALTER ELEGANCE
2’ X 2’ RECESSED DIRECT/INDIRECT FLUORESCENT
OS 2 FT
2’
Genlyte Thomas Company
631 Airport Road, Fall River, MA 02720 - Tel. (508) 679-8131
C.F.I. Division of Canlyte, Inc.
525 Education Road, Cornwall, Ontario
Canada K6H 6C7 - (613) 938-6221