La Crosse Technology TX5U - Manual (Page 12)

12
every moon phase and its beginning dates until the year 2020
(wrapping around to 1998).
Note: The Moon Phase features allow for the discovery of dates of
specific moon phases. Hypothetically, if the date of the next full
moon were desired (and the current moon phase was not a full
moon), simply press the MOON button, press the CH/+ button
repeatedly until you reach a full moon display in LCD 2—the date
of the next full moon would be displayed. Press the CH/+ button
repeatedly and the dates of all full moons until the year 2020 will
sequentially appear.
II. MINIMUM & MAXIMUM TEMPERATURES
A. DISPLAYS AND FUNCTIONS
The Weather Center automatically stores the minimum and maximum
temperatures, and the time and date of their occurrence. In either
LCD 3 or LCD 6 (Indoor and Outdoor respectively) the minimum
temperature appears on the left side of the screen and is marked by the
“MIN” (minimum) icon, while the maximum temperature appears on
the right side of the screen and is marked by the “MAX” (maximum)
icon. The “MIN” temperatures are rounded down, and the “MAX”
temperatures are rounded up—no matter what the decimal values are.
To view the times and dates these temperatures were recorded, follow
the below procedures.
1. Press the MIN/MAX button. The Current Indoor temperature in
LCD 3 shifts to a flashing display of the minimum recorded indoor
temperature, the smaller “MIN” temperature also flashes. The
recorded time simultaneously displays in LCD 1, and the date
simultaneously displays in LCD 2.
Current
Temperature
Humidity
Maximum
Temperature Minimum
Temperature Maximum
Temperature Minimum
Temperature
Outdoor
, 1
IN
Indoor