Lanier LD 035 - Manual (Page 44)

Copier Functions
29
2
BBBB
Press [Specifd. Ratio].
CCCC
Make sure that [Specifd. Ratio] is
highlighted.
DDDD
Enter the length of the original
with the number keys, and then
press the [#] key.
Note
❒ You can enter sizes within the
following ranges:
EEEE
Enter the length of the copy with
the number keys, and then press
[#]
.
Note
❒ To change the length after
pressing [#], select [Original] or
[Copy]
and enter the desired
length.
FFFF
Press [OK].
GGGG
Press [OK].
HHHH
Place your original, and then
press the
{{{{Start}}}} key.
Directional Magnification (%)
Copies can be reduced or enlarged at
different reproduction ratios, hori-
zontally and vertically.
1. Horizontal ratio
2. Vertical ratio
Note
❒ You can also select a preset ratio
close to the desired ratio using [Re-
duce]
or [Enlarge], then adjust with
[ n n n n] or [o o o o].
AAAA
Press [Reduce/Enlarge].
BBBB
Press [Specifd. Ratio].
CCCC
Press [Direct. Mag.%].
To enter the ratio with the number
keys
A Press [Horizontal].
B Enter the desired ratio with the
number keys, followed by [#].
C Press [Vertical].
Metric
version 1–999 mm (in increments of
1 mm)
Inch
version 0.1"–99.9" (in increments of
0.1")
a%
b%
CP2P01EE
AdonisC3_GBcopyF_FM1.book Page 29 Thursday, November 28, 2002 1:53 PM