Lathem AirTime ATX6 - Manual (Page 8)

ATX6 Installation and User Guide
Page 4
If mounting near a ceiling, make sure the top holes are at
least 2” away from the ceiling.
If an external amplifier will be used, mount the ATX6 within 6
feet of its location.
» After deciding the location where the clock will be mounted,
use the enclosed template to make the three marks for the
mounting screws.
» Drill a 5/16" hole at each of the marks
» Insert a wall anchor in each hole and tap it flush to the wall
with the hammer.
» Insert a screw into the top two wall anchors leaving 1/8"
exposed.
» Line up the two keyholes on the back of the case and slip over
the two screws.
» The lower mounting screw can now be inserted into the wall
anchor and secured.