Linksys ULTRA RANGE PLUS WGA600N - Manual (Page 9)

Chapter3
Setup Wizard Advanced Options
 Dual-Band Wreless-N Gamng Adapter
Hgh Securty (WPA/WPA) If your network uses
WPA/WPA2 security, enter the passphrase in the
Passphrase field and click Next.
WPA/WPA2 Passphrase
Passphrase Enter the network passphrase, this can
used any numbers or characters and must be between
8 and 63 characters in length.
Better Compatblty wth Legacy Devces (WEP) If
your network uses WEP security, enter the necessary
information in the appropriate fields and click Next.
WEP Settings
WEP Select a level of WEP encryption, 4 bts (0 hex
dgts) or 8 bts ( hex dgts).
Passphrase The passphrase is case-sensitive and
should be no more than 16 characters in length.
WEP Key Enter the WEP key used to access the
network. This is defined on the access point or router
that you are connecting to.
TX Key Select the transmit key used to access the
network. The default value is .
•
•
Authentcaton Select the appropriate authentication
method used to access the network. The default
setting is Auto.
NOTE: WEP is not supported by Draft 11N
specifications. If your network uses WEP, the
Adapter will only operate in 802.11B/G modes.
The Network Settings screen will appear. Verify the
network settings and click Next to continue or Back to
modify the settings.
Network Settings
The Link Status screen will appear, click Next.
Link Status
14.
15.