La Crosse Technology WS-8118U - Manual (Page 7)

6
MOON PHASE SYMBOLS:
The radio-controlled clock automatically calculates and updates the moon phase diagram on
LCD2. The phase display will change approximately every 2 days, 11 hours. Whenever the
date or time is changed manually, the radio-controlled clock will display the updated moon
phase within a few minutes. 12 stages of the moon’s phases are represented.
New Moon Small Waxing Large Waxing First Quarter Small Waxing Large Waxing
Crescent Crescent Gibbous Gibbous
FullMoon Large Waning Small Waning Last Quarter Large Waning Small Waning
Gibbous Gibbous Crescent Crescent
Note: The moon phase visible in the sky is noted by a darkening of the LCD screen.
Therfore, a full moon is a complete dark circle.
MANUAL SETTINGS
Note:
If the radio-controlled clock has already successfully received the WWVB time signal
and displays the correct time and date, then the Manual settings can be skipped.
After completion of the above described procedures in “Setting up” the manual setting
modes can be entered by pressing and holding the SET key for 3 seconds. The following
settings can now be programmed:
•
Time zone setting
• DST ON/OFF
• Language display setting
• Manual time setting
• Year setting
• Month setting