LevelOne WPC-0301 - Manual (Page 10)

Check the installation
The LEDs of the Wireless LAN Adapter are clearly visible and the status of the network link can be
seen instantly:
1. Once the device is plugged to the station’s CardBus/PCI slot, the LED of the Wireless LAN
Adapter will light up indicating a normal status.
2. When the device plugged to the station’s CardBus/PCI slot and the driver was installed, the ACT
will start alternate blinking; it means that the device is starting to scan the wireless devices near
the Wireless LAN Adapter.
3. While the Wireless LAN Adapter linked up and transmitting data to the Access Point or to other
Wireless LAN station, the Link LED will lighted green.
8