Linksys KX-TG5583 - Manual (Page 3)

For assistance, please visit http://www.panasonic.com/consumersupport 3
Battery installation
1
Insert the battery ( 1), and press it
down until it snaps into the
compartment (
2).
2
Close the handset cover.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY for
information on how to recycle this battery.
Battery charge
Place the handset on the charger for 6
hours before initial use.
L The unit will beep once, the CHARGE
indicator will light, and “Charging” will
be displayed.
L “Charge completed” is displayed
when the battery has been fully charged.
The CHARGE indicator will remain lit.
Note:
L To ensure the battery charges properly,
clean the charge contacts of the handset
and charger with a soft, dry cloth once a
month. Clean more often if the unit is
subject to grease, dust, or high humidity.
Recharging the battery
Recharge the battery when:
– “Recharge battery” is displayed or
3 flashes on the handset display.
– the handset beeps intermittently while it
is in use.
Note:
L If the battery has been discharged, the
handset will display “Charge for 6
HRS
” and
4 when you place the
handset on the charger.
1
2
CHARGE
indicator