LaCie 5big Storage Server - Manual (Page 10)

10
Remove a 5big enclosure drive tray:
1. Use the included drive lock tool to unlock the drive
tray. Turn the lock until it is vertical. (Fig. 04)
2. Place your index finger into the space behind the
handle. (Fig. 05)
3. Draw out the drive tray handle and carefully extract
it (Fig. 06). Please use caution when removing the
drive tray.
See 1.9 Fastening a non-LaCie Hard Disk to a
5big Enclosure Drive Tray if you are adding a
non-LaCie drive.
Install a disk into the 5big enclosure:
1. Make certain that the replacement or new drive is
securely fastened to a drive tray.
2. Carefully insert the drive tray into the empty drive
slot. You will feel resistance when the drive tray is
most of the way in the bay. Gently push the drive
tray handle firmly until you feel it snap into place.
The drive tray handle should be flush with the back
of the 5big enclosure.
3. Use the drive lock tool to lock the drive in place.
CAUTION: After continuous use, the 5big
Storage Server drives may be hot. Use
caution when removing a a drive tray with
a disk.
Fig. 04
Fig. 05
Fig. 06