Connect squeezebox duet, All-wireless network configuration, Set up squeezebox controller – Logitech Network Music System User Manual

Page 12

Advertising
background image

Squeezebox™ Duet User Guide

11

Connect Squeezebox Duet

This step will connect Squeezebox Controller and Receiver to your local
network and allow you to select your music source. There are three sections,
each detailing the steps for the different network configurations described
in the section titled “Choose Your Network Setup” earlier in the User Guide.
You need only to follow the directions for your network setup

All-Wireless Network Configuration

In this configuration, both your Squeezebox Controller and Receiver are
connected to your 802.11 wireless network.

Set Up Squeezebox Controller

Take Squeezebox Controller from the charger. If the Controller isn’t

1.

powered on, press the

home

button to turn it on.

Use the

2.

scroll wheel

to highlight your choice of language and press

the

center

button to select it.

The Welcome screen should appear. Press the

3.

center

button to

move to the next screen.
Select the appropriate Wireless Region for your local region or

4.

country.

Note: Failure to select the appropriate region may violate local laws.
If your country or region isn’t listed, select the one closest to you.

You’ll see the Wireless Networks screen, listing the available wireless

5.

networks. Scroll to your network and press

center

to select it.

Note: If your router is configured not to broadcast its network name,
also known as the SSID, you won’t see it on the list. You can connect
to it by selecting “Other network” and entering the network name by
hand.

Note: If you are certain your network name is broadcast but it isn’t
appearing in the list, you may be out of range. If moving closer
doesn’t correct the problem, double-check that your router is
broadcasting its network name.

Advertising