Lenoxx Electronics DSP-26A - Manual (Page 3)

IB-DSP26A-WM-E-070706 2
REPLACEMENT OF BATTERIES MUST BE DONE BY ADULT FOR SAFETY
INSERT 4 SIZE “AA”
ALKALINE BATTERIES
1. BATTERY INSTALLATION (batteries not included)
1. Slide the BATTERY DOOR out.
2. Insert 4 size “AA” alkaline batteries, according to the + and – markings in the
battery compartment.
3. We recommend alkaline batteries for longer life.
4. Close the BATTERY DOOR.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (Carbon-Zinc) or rechargeable (Nickel-Cadmium)
batteries.
POWER SOURCE
Power the speaker system by inserting 4 size “AA” fresh alkaline batteries or by connecting
the supplied AC adaptor.
BOTTOM OF SET
SLIDE THE BATTERY
DOOR OUT
CLOSE THE BATTERY
DOOR
BATTERY REPLACEMENT
Exhausted batteries may leak and damage the set, or cause weak or distorted
sound. Replace batteries when required.
When the set is not to be used for an extended period, remove the batteries from the
battery compartment.