Lennox Hearth ELITE EDV3530CNM-B - Manual (Page 13)

13
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
EDV3530 LOG PLACEMENT
Figure 7
Catalog Number for the entire log set: 55M02
Log Part
Number Description Number
1 Log, Rear 55M06
2 Log, Diagonal/Left 55M07
3 Log, Diagonal/Right 55M08
4 Log, Front/Left 55M09
5 Log, Top/Right 55M10
6 Log, Front/Center 55M11
1
Locating Pins Align Groove At The Bottom
Of Log (1) Over The Grate And
Push It Towards The Rear.
Align The Holes In One End Of Logs 2 & 3 Over The
Locating Pins And Align The Grooves On The Other
End Over The Grate And Push It Toward The Rear
Locating Pin
2
3
Align The Groove In The Bottom Of Log (4) Over
The Grate And Slide It Toward The Front.
5
4
Align The Hole On The Log (5) Over The Locating Pin
And Postition The Notch Over The Grate As Shown
Position The Grooves On Log (6)
Against The Grate As Shown
6
2
1
4
6
3
5