Lenoxx Electronics CDR-190 - Manual (Page 9)

6. Listening to the radio
Connect the supplied AC power cord (see Setting the Clock).
Slide the Function Switch to
RADIO, and the Mode Switch to
ON position.
1
2
3
Slide the Band Switch to the proper band
position that you want.
Tune into the station you prefer using
the Tuning Control. Adjust for the
clearest sound.
Remember to switch the Mode Switch to ALARM or AUTO position after
listening, and the Auto Lamp will turn on, so that the buzzer alarm or
radio music will wake you up at your preset time. Make sure the volume
control is adjusted loud enough to wake you up.
VOLUME
MODE
SWITCH
FUNCTION
SWITCH
BAND
SWITCH
TUNING
CONTROL
Adjust the Volume Control for desired
loudness.
Slide the Function Switch to OFF
position to turn off the Radio.
4
5
AUTO
LAMP