LG 326*** - Manual (Page 112)

110
APPENDIX
APPENDIX
0 01 1.. P Po ow weerr ((C Co om mm maan nd d:: kk aa))
To control Power On/Off of the TV.
Data 00 : Power Off Data 01 : Power On
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Acknowledgement [a][ ][Set ID][ ][ OK/NG ][Data][x]
To show Power On/Off.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
* If there is the time delay between command and
ack message during power on sequence, It should
be described like “Note: In this model, TV will send
the Acknowledge after power on processing com-
pletion. There might be a time delay between com-
mand and acknowledge.”
Acknowledgement [a][ ][Set ID][ ][ OK/NG ][Data][x]
0 02 2.. A Assp peecctt R Raattiio o ((C Co om mm maannd d:: kk cc)) ((M Maaiinn p piiccttuurree ssiizzee))
To adjust the screen format. (Main picture format)
You can adjust the screen format using the Aspect
Ratio in the Picture menu.
Data 01: Normal screen (4:3)
Data 02: Wide screen (16:9)
Data 04: Zoom1
Data 05: Zoom2
Data 06: Original
Data 07: 14:9
Data 09: Just Scan
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Acknowledgement [c][ ][Set ID][ ][ OK/NG ][Data][x]
* Using the RGB-PC, Component or HDMI input, you
select either 16:9 or 4:3 screen aspect ratio.
* In HDMI/Component (over 720p) mode, JJ u u ss tt
S S cc a a n n is available.
0 03 3.. SSccrreeeenn M Muuttee ((C Co om mm maannd d:: kk d d))
To select screen mute on/off.
Data 00 : Screen mute off (Picture on)
Data 01 : Screen mute on (Picture off)
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Acknowledgement [d][ ][Set ID][ ][ OK/NG ][Data][x]
0 04 4.. V Vo olluum mee M Muuttee ((C Co om mm maannd d:: kk ee))
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Data 00 : Volume mute on (Volume off)
Data 01 : Volume mute off (Volume on)
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Acknowledgement [e][ ][Set ID][ ][ OK/NG ][Data][x]
0 05 5.. V Vo olluum mee C Co onnttrro oll ((C Co om mm maannd d:: kk ff))
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1 ’. See page 112.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Acknowledgement [f][ ][Set ID][ ][ OK/NG ][Data][x]
0 06 6.. C Co onnttrraasstt ((C Co om mm maannd d:: kk gg))
To adjust screen contrast.
You can also adjust contrast in the Picture menu.
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 112.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Acknowledgement [g][ ][Set ID][ ][ OK ][Data][x]
0 07 7.. B Brriigghhttnneessss ((C Co om mm maannd d:: kk hh))
To adjust screen brightness.
You can also adjust brightness in the Picture menu.
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 112.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Acknowledgement [h][ ][Set ID][ ][ OK/NG ][Data][x]
0 08 8.. C Co ollo ouurr ((C Co om mm maannd d:: kk ii))
To adjust the screen colour.
You can also adjust colour in the Picture menu.
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 112.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Acknowledgement [i][ ][Set ID][ ][ OK/NG ][Data][x]
0 09 9.. T Tiinntt ((C Co om mm maannd d:: kk jj))
To adjust the screen tint.
You can also adjust tint in the Picture menu.
Data Red : 00 ~ Green : 64
Refer to ‘Real data mapping 1’. See page 112.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Acknowledgement [j][ ][Set ID][ ][ OK/NG ][Data][x]