La Crosse Technology WS-7044U - Manual (Page 4)

4
DETAILED SET-UP GUIDE
I. BATTERY INSTALLATION
A. REMOTE TEMPERATURE SENSOR
1. Remove the battery cover. Place your
thumb over the two air-vent slots on the
face of the Remote
Temperature Sensor,
push down gently,
slide battery cover
down and off.
2. Observing the correct polarity, install 2
AAA batteries. The batteries will fit
tightly (to avoid start-up problems make
sure that they do not spring free during
installation).
3. Replace the battery cover.
Battery
Cover