Land Pride AT2672 User Manual

Page 4

Advertising
background image

2

Important Safety Information

AT2672 Grooming Mowers 310-302M

Land Pride

07/02/07

Table of Contents

These are common practices that may or may not be applicable to the products described in
this manual.

Transport
Machinery Safely

▲

Comply with state and local laws.

▲

Maximum transport speed for
implement is 20 mph. DO NOT
EXCEED. Never travel at a speed
which does not allow adequate
control of steering and stopping.
Some rough terrain require a
slower speed.

▲

Sudden braking can cause a
towed load to swerve and upset.
Reduce speed if towed load is not
equipped with brakes.

▲

Use the following maximum
speed - tow load weight ratios as
a guideline:

20 mph when weight is less
than or equal to the weight of
tractor.
10 mph when weight is double
the weight of tractor.

▲

IMPORTANT: Do not tow a load
that is more than double the
weight of tractor.

Use Safety
Lights and Devices

▲

Slow moving tractors, self-

propelled equipment, and towed
implements can create a hazard
when driven on public roads. They
are difficult to see, especially at
night.

▲

Flashing warning lights and turn

signals are recommended
whenever driving on public roads.

Practice Safe Maintenance

▲

Understand procedure before

doing work. Use proper tools and
equipment, refer to Operator’s
Manual for additional information.

▲

Work in a clean dry area.

▲

Lower the implement to the

ground, put tractor in park, turn off
engine, and remove key before
performing maintenance.

▲

Allow implement to cool

completely.

▲

Do not grease or oil implement

while it is in operation.

▲

Inspect all parts. Make sure parts

are in good condition & installed
properly.

▲

Remove buildup of grease, oil or

debris.

▲

Remove all tools and unused

parts from implement before
operation.

Tractors With Cabs
Tractors Equipped With
ROPS

▲

There should be sufficient

clearance for the operator when
mounted to a tractor with a cab or
that is equipped with ROPS.

▲

The ROPS may need to be

extended or flipped around to
obtain sufficient clearance.

Advertising