La Crosse Technology WS-9049 - Manual (Page 5)

17
 Stop the alarm during alarm ringing
 Stop snooze mode
ALM/DATE key
 Press and hold key for 3 seconds to enter the alarm set mode
 Activate/de-activate the alarm time
 Silence the alarm
 Cancel snooze mode
 Display date
IN key

Press to toggle between MAX/MIN and current indoor
temperature/humidity data
 Press to set the alarm hour (inside alarm setting mode)
 Decrease relative pressure value (within manual set mode)
 Silence the alarm
 Cancel snooze mode
18
OUT/+ key

Press briefly to toggle between MAX/MIN and current outdoor
temperature/humidity data
 Increase, change, toggle all values in manual set mode
 Press to set the alarm minute (inside alarm setting mode)
 Silence the alarm
 Cancel snooze mode
SNOOZE/CH key
 Activate
snooze function
 Exit the manual and alarm set modes
 Switch between display of channels (if more than 1 transmitter is
used)
LCD SCREEN
The LCD screen is split into 4 sections displaying the information for
time/calendar/alarm/moon phase, indoor data, weather forecast and
outdoor data.
19
Moon phase
icon
Weather
tendency
indicator
Time
Calendar
or alarm
time
Indoor relative
humidity in
RH%
Time reception icon
(for WWVB time)
Indoor
temperature
in °F/°C
Weather
forecast
icon
Outdoor data
signal reception
indicator*
Outdoor
temperature in
°F/°C
Outdoor
relative
humidity in
RH%
Comfort
indicator icon
Relative air
pressure history
Relative air
pressure in
hPa / inHg
Alarm icon
Remote transmitter
number (if more than 1
transmitter is used)
Low battery
indicator
20
* When the signal is successfully received by the Weather Station, the
outdoor transmission icon will be switched on. If not successful, the
icon will not be shown on LCD. You can then see whether the last
reception was successful (icon on) or not (icon off). A short blinking of the
icon indicates that signal reception is currently taking place.
MANUAL SETTINGS:
The following manual settings can be changed when pressing the SET
key:
 LCD
contrast setting
 Time zone setting
 DST ON/OFF setting
 Time reception ON/OFF setting
 12/24-hour format setting
 Manual time setting
 Calendar setting
 °F/°C temperature setting
 Air pressure setting (hPa / inHg)
 Relative air pressure setting
 Weather forecasting icon sensitivity setting