Lexmark X658 MFP - Manual (Page 14)

setpagedevice
where x y are the PageSize in points.
Tray selected with tray operators
= Supported
X = Not supported Printer models
Operator Tray selected (corresponding
image size is set) T650n/dn/dtn, T652n/dn/dtn,
T654n/dn/dtn X651 MFP, X652 MFP,
X654 MFP, X656 MFP,
X658 MFP
a4tray tray with A4-size paper
a5tray tray with A5-size paper
b5tray tray with B5-size paper
customtray tray with custom-size paper X X
executivetray tray with executive-size paper
foliotray tray with folio-size paper
legaltray tray with legal-size paper
lettertray tray with letter-size paper
oficiotray tray with oficio-size paper
statementtray tray with statement-size paper
PostScript envelope size support
The literal names in “Envelope sizes supported” on page 15 are also supported as operators in userdict. These
operators change the image size, but do not change the active paper source. Therefore, when these operators are
used, part of the image may be clipped.
When these literal names are used as operators, it is equivalent to executing the following PostScript emulation
sequence. The following example uses a 3.875 x 7.5 envelope.
<</Policies <</PageSize 7>> /PageSize [279 540]>> >>setpagedevice
PostScript (PS) emulation
14