Lyson PHOTOCHROME R-38 - Manual (Page 3)

STEP 1
Before starting the installation, print a good nozzle check print using the existing inks
installed on your printer. Write the date on the print and keep it. No warranty claim
regarding the bulk ink feed system will be accepted unless it is supported by a good
nozzle check print produced before the system was installed. The utility for producing
a nozzle check print can be found under the ‘Maintenance’ or ‘Utilities’ tab of the
Epson print driver software supplied with your printer. A good nozzle check print
should like this:
STEP 2
Ensure that you are using genuine Epson inks before proceeding, and that your status
monitor shows a reading of more than 10% content in each OEM cartridge. The Lyson
RCS chips can only function correctly when reading OEM brand chips with more than a
10% status.
STEP 3
Open your Epson 3800 c
artridge lid by depressing the ‘open lid’ button for 3 seconds
(see Pic)