Set keel offset – Lowrance electronic LCX-104C User Manual

Page 80

Advertising

Set Keel Offset

This unit measures water depth from the face of the transducer. Since
the transducer is installed below the water surface, the distance dis-
played by the digital depth, chart depth scale, chart cursor or fish sym-
bols is

not the exact water depth. If the transducer is 1 foot below the

surface, and the screen shows the water depth as 30 feet, then the ac-
tual depth is 31 feet.

On sailboats or other large vessels with deep drafts, the distance be-
tween the transducer installation and the keel or lower engine unit can
be several feet. In those cases, an inexact depth reading could result in
grounding or striking underwater structure. The Keel Offset feature
eliminates the need for the navigator to mentally calculate how much
water is under his keel.

Keel Offset lets you calibrate the digital depth: chart depth scale, chart
cursor depth and fish symbol depth displayed on the screen. To calibrate
the depth indicators, first measure the distance from the face of the
transducer to the lowest part of the boat. In this example, we will use 3.5
feet. This will entered as a

negative 3.5 feet, which makes the depth indi-

cators perform as if the transducer's lower in the water than it really is.

1. Press

MENU

↓ to

EEL

FFSET

ENT

2. The Keel Offset dialog box appears. Press

↓ to change the plus (+)

sign to a minus (–) sign.

3. Press

→ to the first number, then press ↑ to change the number to 3

4. Press

→ to the second number, then press ↑ to change the number to

5, then press

EXIT

. The depth indicators now accurately show the depth

of water beneath the keel.

NOTE:

If knowing the exact depth of water beneath the keel is less impor-
tant, you can calibrate the depth indicators so that they show the ac-
tual water depth from surface to bottom. To do this, first measure the
distance from the face of the transducer up to the surface (the water
line on the boat). In this example, we will use 1.5 feet. This will be en-
tered as a

positive 1.5 feet, which makes the depth indicators perform

as if the transducer's higher in the water than it really is.