Life Fitness TR9700 User Manual

Configuration no. 1, How to...replace or install rear roller guards

Advertising
background image

Life Fitness Model TR9700, TR9500, TR9100 Treadmills

How To...Replace or Install Rear Roller Guards

Tools Required: Philips Screwdriver

NOTE: The following steps are applicable to units with Configuration No. 1, Rear Roller Guards.

1. Remove the Screws securing the Rear Roller Guard Assembly to the Frame.

2. Remove the old Grommets from the Rear Roller Welded Guard Tab and Base Frame (model

specific).

3. Install the new Grommets (included in kit) in the Rear Roller Guard Weldment and Base Frame

locations.

4. Place new Roller Guard in position as shown with the top surface under walking belt. Align mounting

holes.

Roller Guard to be

located between belt

and deck

Align mounting holes
with grommet holes

Cover Guard

Roller Guard, RT
Roller Guard, LT

Screw

Grommet

Screw

Grommet

Configuration No. 1

Advertising
This manual is related to the following products: