Lexicon Digital Controller MC-12 - Manual (Page 102)

Setup Lexicon
3-58
CAL NOISE ON, OFF
Determines whether bass peak limiters are set with an internal or
external calibration source.
To set the CAL NOISE parameter:
• Select ON to activate an internal calibration noise signal to set
bass peak limiters.
• Select OFF to deactivate the internal calibration noise signal.
Setting bass peak limiters with the calibration noise set to OFF
requires an external calibration source such as an audio calibra-
tion disc.
L/R LIMITER ON, OFF
Limits low frequency signals sent to the subwoofer or redirected to
other speakers.
To set the L/R LIMITER parameter:
• Select ON to restrict the output level of the low frequency
signals to the L/R LIMIT ADJ parameter setting.
• Select OFF to allow an unrestricted signal output level, regard-
less of the L/R LIMIT ADJ parameter setting.
L/R LIMIT ADJ 75 to 120dB
Specifies the output level restriction applied to the Subwoofer L/R
output connectors, and to other Main Zone audio output
connectors to which low frequency signals are redirected.
To set the L/R LIMIT ADJ parameter:
1. Select the L/R LIMIT ADJ parameter.
The parameter initally sets to 75dB.
2. Press the and arrow buttons to change the parameter
value.
The selected output level restriction is applied when the L/R
LIMITER parameter is set to ON.
LFE LIMITER ON, OFF
Limits low frequency signals sent to the LFE subwoofer or redirected
to other speakers.
To set the LFE LIMITER parameter:
• Select ON to restrict the output level of the low frequency
signals to the LFE LIMIT ADJ parameter setting.
• Select OFF to allow an unrestricted signal output level, regard-
less of the LFE LIMIT ADJ parameter setting.
SPEAKERS SETUP MANUAL LEVELS CALIBRATION BASS PEAK LIMITERS
CAL NOISE
SPEAKERS SETUP MANUAL LEVELS CALIBRATION BASS PEAK LIMITERS
L/R LIMITER
SPEAKERS SETUP MANUAL LEVELS CALIBRATION BASS PEAK LIMITERS
L/R LIMITER ADJ
SPEAKERS SETUP MANUAL LEVELS CALIBRATION BASS PEAK LIMITERS
LFE LIMITER