Lightolier SL205A - Manual (Page 2)

SL205A
Decorative, Spectral, Floating Paper, Optic Forms
Page 2 of 3
Job Information Type:
Features
1. Reflector: Specular aluminum, 16 ga. comfort clear low
iridescence finish.
2. Lens: 1 ⅛" (29mm) thick clear acrylic finished with a
translucent diffused coating.
3. Trim Ring: 12 ga. aluminum. Stainless Steel finish.
4. Socket Cup: Heat dissipating die-cast aluminum. Positive
locking attachment, without tools, to reflector assures
proper optical alignment of lamp.
5. Mounting Frame: Die-cast aluminum suitable for dry
ceilings.
6. Retaining Springs: Rust resistant springs simplify reflector/
housing removal for inspection and maintenance.
7. Mounting Brackets: 16 ga. steel. Use 18" (457mm)
mounting bars (optional) or with standard ¾" (19mm), 1 ½"
(38mm) lathing channels (by others) or ½" (13mm) tubing
(by others). Adjust vertically from inside of fixture.
8. Junction Box: 14 ga. steel, 4" (102mm) x 3 ½" (89mm x 2"
(51mm) box, allows inspection from below. UL “c/us” listed
for through branch circuit wiring with maximum of 8 no. 12,
90º C conductors.
9. Screws: Stainless Steel, Philips head.
Mounting
Recessed, Non-IC Type (non thermal insulation contact).
Luminaire Weight: 4 lbs.
Electrical
Ballast: Electronic Program Rapid Start T4 quad lamp ballast.
Universal voltage “U” ballast automatically detects 120 volts
or 277 volts operation. No visible flicker on starting, internally
fused and protection circuit for lamp end of life. Sound rated
“A”. Designed for removal without tools from inside of
luminaire for easy field inspection or service replacement.
TA: 18W TTT non-dimming
Lampholder: GX24q-2 base, 4 Pin.
Options and Accessories
Mounting Bars:
1950, set of 2, 18" (457mm) long.
1951, set of 2, 30" (762mm) long.
T-Bar Anchor Clips:
1956, set of 4, for anchoring mounting bars to T-Bar runners.
Dimming Ballast*
Labels
cULus Listed. Suitable for wet locations.
1 ⅛ " MAX.
(29mm)
8 ⅝ "
(219mm)
4 ⅝ "
(117mm)
6 ⅜ "
(162mm)
4 5/8"
(117mm)
8 5/8"
(219mm)
6 3/8"
(162mm)
10 ½ "
(267mm)
11 ½ "
(292mm)