Lenoxx Electronics CD-106 - Manual (Page 8)

You can make a program of up
to 19 tracks in the order you
want them to be played.
1. Slide the Function Switch to CD position. Make sure
the CD is stopped.
2. Press the Program Button. The number “0” and the
Program Lamp will flash.
3. Press or to select the tracks you want to
program in the order you want.
4. Press the Program Button to confirm. The number “0”
and the Program Lamp will flash.
5. Repeat steps 3 and 4. You can program up to 19
tracks.
6. Press to start program play. The Play/Pause Lamp
turns on and the Program Lamp will remain flashing.
To change the current program
Just creat a new program by following the above programming procedures.
7
Repeat
Lamp
To cancel Program Play
Press the Stop Button and the Program Lamp goes off.
P R O G .
Creating your own music program
(Program Play)
Program
Lamp
Play/Pause
Lamp
P R O G .
Program
Button
CD-106081199 AS v.1 E