Radio operation – Legacy Car Audio LDVD84 User Manual
Page 13
RADIO OPERATION
Press BND button (11) to change bands as below:
Rotate TUNING knob (3) clockwise or anticlockwise to adjust the frequency upward
or downward.
Press the LOC button (18) to select between local setting for reception of strong
station and distant setting for reception of weak stations when tuning.
BAND
SELECT STATION
LOCAL/DISTAN
AF
MONO/STEREO
TA
(FOR RDS ONLY)
AF button (1)[ALTERNATIVE FREQUENCIES](FOR RDS ONLY)
1. By pushing short.
1) RADIO mode
changed the mode to CDP mode.
2). CDP mode
changed the PLAY mode to PAUSE mode and vice versa.
2. By pushing long.
It is engaging whether "AF SEARCH" mode ON or OFF.
If "AF SEARCH" mode is tunred on, the 1'st AF is displayed onthe LCD. All the
AF list can be shown by pressing "DISPLAY" key during "AF SEARCH ON" mode.
When AF is shown, the display mode changes to the frequency if the user
changes the frequency.RDS signal is NOT received during AF search mode.
This mode is released after few seconds. But, this mode is NOTreleased during
changing the tunned frequency to search AF.
In FM band, press MON button (5) to select mono or stereo reception for radio
stations. You can sometimes improve reception of distant stations by selecting
mono operation.
TA function [TRAFFIC ANNOUNCEMENT] BUTTON
When pressed short
1). RADIO mode
Depending on the installed option diode matrix,
LW/MW/FM band is toggled cyclically through the tuning bands.
-> FM -> MW -> LW (for 3 bands Europe)
or
FLASHING LED
If the front panel is not on the main unit, LED (19) will be flashing.
RESET button (20) is placed on the housing and must be activated with either a
ballpoint pen or thin metal object. The RESET button is to be activated for the
following reasons:
-Initial installation of the unit when all wiring is completed.
-All the function buttons do not operate.
-Error symbol on the display.
Note: If press RESET button , the unit can't work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the socket on the back of the front panel.
RESET BUTTON FUNCTION
FM
MW
LW
For 3 Bands (Europe)
FM
MW
For 2 Bands (Europe)
FM
AM
For 2 Bands (USA)
13