La Crosse Technology WS-7138U - Manual (Page 14)

14
18. “MIN” remains above the temperature and the humidity and
bar graph remain flashing
a. The date of the minimum humidity reading is displayed
in the time/ date portion of the LCD
19. Press and release the MIN/MAX/ + button to exit the indoor
MIN/MAX mode.
B. VIEWING THE OUTDOOR TEMPERATURE/HUMIDITY
RECORDS
Note: When recalling the indoor temperature/humidity records the
temperature records (maximum, then minimum) will be displayed
followed by the humidity records (maximum, then minimum).
Note: If no button is pressed for approximately 15 seconds while
viewing any MIN/MAX record the display will return to the normal
display mode, showing the current time and temperature/humidity.
Note: While viewing any of the MIN/MAX records, pressing the
IN/OUT, SET/CH button will reset the record to the current time and
date.
Note: When using multiple sensors, first select the remote sensor that
you wish to see the MIN/MAX data for before continuing.
1. Press the MIN/MAX/ + button once.
2. The display will now show the Date and Month at the bottom
of the LCD.
3. Press and release the MIN/MAX/ + button.
4. “MAX” appears above the temperature and the temperature
flashes.
a. The time of the maximum temperature reading is
displayed in the time/date portion of the LCD.
5. Press and release the MIN/MAX/ + button.
6. “MAX” remains above the temperature and the temperature
remains flashing.
a. The date of the maximum temperature reading is now
displayed in the time/date portion of the LCD.
7. Press and release the MIN/MAX/ + button.