La Crosse Technology WS-9057U - Manual (Page 4)

19
Weather Tendency Arrows
Other possible displays are 2 weather tendency arrows, one that points
up (on the left side of the forecast) and one that points down (on the right
side of the forecast). These arrows reflect current changes in the air
pressure. An arrow pointing up indicates that the air pressure is
increasing and the weather is expected to improve or remain good. An
arrow pointing down indicates that the air pressure is decreasing and the
weather is expected to become worse or remain poor. No arrow means
the pressure is stable.
COMFORT INDICATOR FOR INDOOR TEMPERATURE AND
HUMIDITY:
The comfort level indicator appears in between the indoor temperature
and humidity.
The indicator will display a happy-face when the temperature is between
68 and 79 degrees Fahrenheit (20 and 25.9 degrees Celsius) and the
humidity is between 45% and 64%.
A sad-face will be displayed when the temperature and humidity are
outside the mentioned ranges.
20
POSITIONING THE WIRELESS FORECAST STATION
The Wireless forecast station provides the option of table standing or wall
mounting the unit. Before wall mounting, please check that the outdoor
data can be received from the desired locations.
FOLDOUT TABLE STANDS:
The foldout table stands legs are located on the backside. Simply
unfold the stands on the back. Once the foldout table stands are
extended, place the wireless forecast station in an appropriate
location.
TO WALL MOUNT:
1. Fix a screw (not supplied) into the desired wall, leaving
the head extended out by about 0.2” (5mm).
2. Place the wireless forecast station onto the screw, using
the hanging hole on the backside. Gently pull the wireless
forecast station down to lock the screw into place.
21
POSITIONING THE OUTDOOR TRANSMITTER
To achieve a true temperature reading, avoid mounting where direct
sunlight can reach the outdoor temperature sensor or Wireless
Temperature Station. While the outdoor temperature sensor is weather
resistant, avoid submersion in water or snow. We recommend that you
mount the outdoor temperature sensor on an outside North-facing wall.
The transmission range is 330ft— open air. Obstacles such as walls,
concrete, and large metal objects can reduce the range. Place both units
in desired location, and wait approximately 15 minutes before
permanently mounting to ensure that there is proper reception.
Wall Mount:
1. Remove the mounting bracket from the outdoor temperature
sensor .
2. Place the mounting bracket over the desired shaded location
(wall or table).
3. Through the screw holes of the bracket, mark the mounting
surface with a pencil.
4. Screw mounting bracket onto the mounting surface. Ensure
that the screws are flush with the bracket.
5. Insert the outdoor temperature sensor into the bracket.
22
Note: Mounting with adhesive tape is not recommended as a permanent
mounting solution. Only use the adhesive tape during set-up process.
CARE AND MAINTENANCE:
x Do Not Mix Old and New Batteries
x Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
x Do not expose the display to extreme temperatures, vibration or shock.
x Keep display dry.
x Clean display with a soft damp cloth. Do not use solvents or scouring
agents.
x The product is not a toy. Keep it out of reach of children.
x The product is not to be used for medical purpose or for public
information, but is determined for home use only.
x The specifications of this product may change without prior notice.
x Improper use or unauthorized opening of housing will void the warranty.
x If the unit does not work properly, change the batteries.
23
SPECIFICATIONS
Temperature measuring range:
Indoor: 14.2ºF to 139.8ºF with 0.2ºF resolution
-9.9ºC to +59.9ºC with 0.1°C resolution
(“OF.L” displayed if outside this range)
Outdoor: -39.8ºF to +139.8ºF with 0.2ºF resolution
-39.9ºC to +59.9ºC with 0.1°C resolution
(“OF.L” displayed if outside this range)
Humidity range:
Indoor humidity range: 20% to 95% with 1% resolution
(Display “- -“ if temperature is OF.L; display “- -“
if < 20% and “95%” if > 95%)
Outdoor humidity range: 20% to 99% with 1% resolution
(Display “- -“ if outside temperature is OF.L;
display 20% if < 20% and 95% if > 95%)
24
Data checking intervals
Indoor Temperature:
Every 15 seconds
Humidity: Every 64 seconds
Air pressure checking interval: Every 15 seconds
Outdoor temperature and humidity: Every 4 seconds
Transmission range:
up to 330 feet (open space)
Power consumption: (alkaline batteries recommended)
Wireless forecast station:
2 x C, IEC LR14, 1.5V
(not included)
TX29UDTH-IT transmitter: 2 x AA, IEC LR6, 1.5V
(not included)
Battery life: up to 24 months
Dimensions (L x W x H):
Wireless forecast station: 7.49“x 1.33“x 7.65“/
190.4 x 37 x 190.4 mm
TX29UDTH-IT transmitter: 1.50” x 0.83” x 5.05” /
38.2mm x 21.2mm x 128.3mm