Linksys SR224G User Manual
Page 4
2
mini-GBIC
The mini-GBIC (gigabit interface converter) port is a con-
nection point for a mini-GBIC module, so the Switch can be
uplinked via fiber to another switch. The mini-GBIC port is
compatible with two types of modules, 850 nm and 1310 nm.
The power port is located on the back panel of the Switch.
(power)
The power port is where you will connect the included power
cord.
3
Chapter 2: Getting to Know the
24-Port 10/100 + 1-Port Gigabit
Switch + 1 miniGBIC
The LEDs and network ports are located on the front panel of the Switch. All
network ports are independent, so you can use all of them simultaneously.
LEDS
System
Green. The System LED will light up when the Switch is
powered on.
1-24
Green. Each LED will light up when there is a connection
made through its corresponding port. It will flash when there
is activity on its corresponding port.
G1
Green. The G1 LED will light up when there is a connection
made through the Gigabit port. It will flash when there is
activity on the Gigabit port.
G2
Green. The G2 LED will light up when there is a connection
made through the miniGBIC port. It will flash when there is
activity on the miniGBIC port.
Ports
1-24
These 10/100 ports are connection points for PCs and other
network devices, such as additional switches.
Gigabit
This 10/100/1000 port is a connection point for a network
device, such as a Gigabit server.
Figure 2-1
Front Panel LEDs and Ports
Back Panel Port
Figure 2-2