Liebherr BF/BFI 1051 - Manual (Page 22)

BF/BFI 1051 18
W
ARRANTY
Customer Service - Figure 1
If none of the above causes apply and you
cannot correct the fault yourself, or if the
temperature display reads “F1” to “F5”,
this means there is a fault. Please contact
your nearest customer service department (see
enclosed list for addresses).
Give the fault number displayed, together with
the
Type Designation (Fig. 1, 29),
Service Number / Serial number (Fig. 1, 30)
Appliance Number (Fig. 1, 31)
as given on the model plate, to ensure prompt,
accurate servicing. The model plate is located
inside the appliance on the left-hand side.
Leave the appliance closed until the customer
service engineer arrives to prevent any further cold
loss.
Appliance Information
Record this information when the appliance is
installed.
Type Designation: _________________________
Service/serial Number: _____________________
Appliance Number: ________________________
Date of Purchase: _________________________
Where Purchased: _________________________