Lancom Systems 3550 - Manual (Page 15)

LANCOM 3550 Wireless
࡯ Chapter 1: Introduction
15
EN
UMTS/HSPDA function for minternet connection, as mobile conference
room or as backup solution ✔
Wireless LAN
Wireless transmission by IEEE 802.11g / IEEE 802.11b or wireless
transmission by IEEE 802.11a
✔
Simultaneous dual band operation possible with additional radio card
✔
Point-to-point mode (six P2P paths can be defined per WLAN inter-
face) ✔
Relay function to link two P2P connections ✔
Turbo Mode: Double the bandwidth at 2.4 GHz and 5 GHz.
✔
Super AG incl. hardware compression and bursting
✔
Multi SSID
✔
Roaming function ✔
802.11i / WPA with hardware AES encryption
✔
WEP encryption (up to 128 Bit key length, WEP152)
✔
IEEE 802.1x/EAP
✔
MAC address filter (ACL) ✔
Individual passphrases per MAC address (LEPS)
✔
Closed network function
✔
Access to RADIUS server
✔
VLAN ✔
Traffic lock function
✔
WLANmonitor for visualization of access points und clients in larger
WLANs
✔
WLAN group configuration for simultaneous configuration of multiple
devices
✔
Connection to the LAN
Fast-Ethernet-connection (10/100base-TX) ✔
Power-over-Ethernet (PoE)
✔
LANCOM 3550
Wireless