Lennox Hearth INTER-TEL 8662 - Manual (Page 46)

Call Features
Page 32 Mitel ® Model 8662 User Guide – Issue 12, October 2008
Ending a Conference and Placing all Parties on Hold
You can end a conference and place all conference parties on Individual Hold, allowing you to
toggle between the held parties and speak to one party at a time.
To end a conference and place all parties on Individual Hold:
Press the CNF button, and then press (Hold). CONFERENCE PARTIES ON HOLD
appears.
To toggle between the held callers:
Press (Hold) twice for internal parties or the flashing CALL button for external parties.
Using Record-A-Call
You can use Record-A-Call to record an ongoing call as a mailbox message. 2 You can then
retrieve the message from your voice mailbox. The Record-A-Call feature stays active after the
other party hangs up, so you can add to the recorded call with your own message. This feature
is not supported for peer-to-peer (P2P) calls. Contact your system administrator for more
information.
To use Record-A-Call:
1. While on a call, press (Special), and then dial 385 to turn Record-A-Call on or
press the RECORD-A-CALL menu button. REQUESTING RECORD-A-CALL appears.
2. Enter the voice mailbox number where you want the recording saved. RECORD-A-CALL
IN PROGRESS appears, and both you and the calling party hear a confirmation tone (if
enabled).
To stop Record-A-Call:
Do one of the following:
• Press (Special), and then dial 385.
• Press the CANCEL RECORDING menu button.
• Hang up.
2. This feature may or may not be enabled for your system.
NOTE
If your system administrator assigns the Record-a-Call voice mailbox
destination, you do not need to enter the voice mailbox number.